The newly designed M series M500 is user friendly
with design simplicity in mind. It requires no
tools for filter changes. Use in-line cartridge
filter design makes filter changes fast, clean and
easy. This space saving allows maximum use of your
under counter space.
Inline filters
Replacing the filters on this system is one of the
easiest to do. Inline filters make cartridge
replacement fast, clean & easy, without contact
with used filter material . No Mess, No Fuss with
these filters just remove the old ones and install
the new filters.
Easy Installation
The stylish design of the PurePro M500 system was
created to fit elegantly in any kitchen
environment. The economical, friendly,
easy-to-install and easy-to-maintain solution to
your purified water needs. Use quick-fitting
connector design makes installation fast and easy.
Features:
3.2 Gallons NSF Standards Water Storage Tank.
Complete 5 stage reverse osmosis water filter
system.
Use inline filter design makes filter changes
fast, clean and easy.
Automatic Shut-off Valve (solenoid valve for
booster pump type)
Flow Restrictor, Stainless Steel Check Valve.
Long Reach Chrome Faucet (upgrade faucet is
acceptable)
Feed water connector & deliver valve
Drain Saddle Valve.
Easy installation, just plug & drink
Quick-connect fitting for easy installation.
Completely Assembled & Water leaking testing
100% Factory Tested and Sterilized Ready for
Installation.
High capacity booster pump. (optional)
UV stainless steel. 1 gallon per minute (optional)
M500 - In-Line Cartridge Filters
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in
removing dirt, rust and sand particles.
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
(Stage 3) Granular Activated Carbon Filter :
It takes out 99% of the chlorine and organic
chemicals. It provides enhanced reduction of
taste, odor, and color.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane
that processes 50 gallons per day. It remove the
following hard water contaminants that may be
present in your water: lead, cooper, barium,
chromium, mercury, sodium, cadmium, fluoride,
nitrite, nitrate, and selenium.
(Stage 5) Inline Post Carbon filter:
This carbon post filter removes objectionable
tastes and odors to enhance the quality of your
drinking water. We are using NSF approved post
carbon to guarantee the taste of water.
--------------------------------------------------------------------------------
Specifications:
Production: 50 GPD / 189 LPD
Water storage tank: 3.2gallons / 12.2 liters
With a booster pump (optional):
-Input in AC 110Volt, 220Volt or 240Volt
(50/60Hz).
Operation pressure: 10 -80 psi
Dimensions: (cm)20 (L) x 28(H) x 31.5 (W)
(cm) 28 (L) x 28(W) x 35 (H)- tank
Weight: 6 kg - system
4 kg - tank
Model Number
M500-M500 with booster pump
M500-UV: M500 with UV sterilizer
M500-P-UV : M500 with booster pump and UV
